
Sentinel Technology Services is proud to partner with Royal Power Energy, Inc. as an exclusive distributor of their OmniPower™ Automatic Power Factor Correction System.
OmniPower™ Power Factor Correction System
Power factor indicates how much power is actually being used to perform useful work at your facility, and how much power is being wasted.
*Wasted power is power that your utility still charges you for.
The OmniPower™ Power Factor Correction System is a custom-built, enclosure-based power efficiency and conditioning system. It includes banks of capacitors, automatic switching control circuits (which keep the power factor at 0.98 24-7), passive and active harmonic filters, and scalable, dynamic load balancing modules.
OmniPower™ Power Factor Correction System is the only system in existence that:
What you will see when you work with us:
OmniPower™ Power Factor Correction System
Power factor indicates how much power is actually being used to perform useful work at your facility, and how much power is being wasted.
*Wasted power is power that your utility still charges you for.
The OmniPower™ Power Factor Correction System is a custom-built, enclosure-based power efficiency and conditioning system. It includes banks of capacitors, automatic switching control circuits (which keep the power factor at 0.98 24-7), passive and active harmonic filters, and scalable, dynamic load balancing modules.
OmniPower™ Power Factor Correction System is the only system in existence that:
- Dynamically detects and adjusts power factor to a perfect >0.98 PF.
- Automatically analyzes power efficiency.
- 24/7/365 continuous remote monitoring with real-time alert and system reporting.
What you will see when you work with us:
- Average Energy Savings: 25%-40%
- Reduced Carbon Footprint: 20%-35%
- Decreased Equipment Maintenance
- Harmonic Filtering: High End Equipment & Machinery in your facility are susceptible to harmonic distortion. The OmniPower™ PF Correction system addresses this by completely filtering out harmonic distortion.
Power Factor Correction System Advantages
Advantages For End Users
As motor load changes, the PF is kept at a continuous optimum of 0.98 PF, we can observe the following effects:
As motor load changes, the PF is kept at a continuous optimum of 0.98 PF, we can observe the following effects:
- Line currents are significantly reduced
- kVAR is significantly reduced
- kVA is reduced
- kW is reduced
- kWH is reduced
- Conductor heating is reduced and equipment life extended
- Energy Bill is reduced by 25-40%
- Relieves stress from the grid
- Relieves load from the utility network
- Improves sub-station maintenance
- Increases sub-station longevity
- Improves transformer maintenance
- Increases transformer longevity
- Can be implemented on the Primary side, 13.8 KV to 35 KV
- Can be implemented on the Secondary side, 208V to 600V
- Reduces carbon dioxide and nitrous oxide from power production emissions
- Improves utility’s carbon footprint for new State & Federal Government requirements
- “Clean Power” from renewables enables the power grid to be more stable, predictable, and reliable, allowing protection settings to do their job
- kW heating losses (I2R) from harmonic currents produced are kept to a minimum.
- “Dirty power” (mainly 5th harmonic currents) from inverters is filtered and not reflected/introduced into the power grid.
- “Clean power” results in reduced heating on pad mount transformers, pole-top transformers, and power transformers, leading to a longer life.
- Underground cable failure (approx. 30%) from harmonics heating effects can be reduced for fewer outages.